Mineral Compressor Oil
RENOLIN RSC is a premium mineral lubricant for oil-injected rotary screw and sliding vane compressors where the oil directly contacts the compressed gas during compression. The formulation delivers excellent thermal stability, air release, and resistance to deposit formation at the high air-discharge temperatures typical in single-stage compression. Meets ISO/DP 6521 categories DAH and DAG, and is listed as compatible with Sullair and Atlas Copco specifications.
RENOLIN RSC Series, Mineral Air Compressor Oil
| Product | KV @40°C (cSt) | KV @100°C (cSt) | VI | Flash Pt (°C) | Pour Pt (°C) |
|---|---|---|---|---|---|
| RENOLIN RSC 32 | 32 | 5.7 | 114 | 240 | — |
| RENOLIN RSC 46 | 46 | 6.9 | 109 | 244 | — |
| RENOLIN RSC 68 | 68 | 8.9 | 101 | 238 | — |
| RENOLIN RSC 100 | 100 | 10.9 | 95 | 248 | — |
| RENOLIN RSC 150 | 150 | 15.1 | 101 | 268 | — |
Semi-Synthetic Compressor Oil
RENOLIN SC MC bridges the gap between mineral and fully synthetic compressor lubricants, using a semi-synthetic MC base for improved oxidation resistance and longer drain intervals compared to mineral grades, without the full cost of PAO. Suitable for oil-injected sliding vane and screw-type compressors with discharge temperatures up to 110°C. Meets DIN 51524 Part 1.
RENOLIN SC MC Series, Semi-Synthetic Compressor Oil
| Product | KV @40°C (cSt) | KV @100°C (cSt) | VI | Flash Pt (°C) | Pour Pt (°C) |
|---|---|---|---|---|---|
| RENOLIN SC MC 32 | 32 | 5.91 | 130 | 238 | — |
| RENOLIN SC MC 46 | 46 | 8.81 | 128 | 254 | — |
| RENOLIN SC MC 68 | 68 | 11.08 | 165 | 240 | — |
Synthetic PAO Compressor Oil
RENOLIN UNISYN OL is a fully synthetic PAO-based compressor oil offering the most effective combination of drain interval extension, energy efficiency, and deposit prevention available in the RENOLIN compressor range. Meets ISO 6743-3 L-DAG, L-DAH, and L-DAJ categories across all grades. Extended drain intervals, excellent air release, and low varnish and deposit tendency make this the preferred choice for critical and high-utilisation compressor installations. OEM approvals include Atlas Copco, Sullair, and Siemens.
RENOLIN UNISYN OL Series, Synthetic PAO Compressor Oil
| Product | KV @40°C (cSt) | KV @100°C (cSt) | VI | Flash Pt (°C) | Pour Pt (°C) |
|---|---|---|---|---|---|
| RENOLIN UNISYN OL 32 | 32 | 6.1 | 138 | 240 | −60 |
| RENOLIN UNISYN OL 46 | 46 | 7.9 | 141 | 260 | −54 |
| RENOLIN UNISYN OL 68 | 68 | 10.4 | 146 | 260 | −54 |
| RENOLIN UNISYN OL 100 | 100 | 14.4 | 149 | 260 | −54 |
| RENOLIN UNISYN OL 150 | 150 | 19.6 | 160 | 250 | −47 |
RENOLIN SYNAIR 46, Synthetic Ester/PAG Screw Compressor Oil
Fully synthetic screw compressor oil based on a polyester and polyglycol combination, delivering outstanding oxidation stability, very high viscosity index, and excellent air-release properties. Recommended for flooded or oil-injected screw air compressors where maximum drain intervals and deposit-free performance are required.
| Product | KV @40°C (cSt) | KV @100°C (cSt) | VI | Flash Pt (°C) | Pour Pt (°C) |
|---|---|---|---|---|---|
| RENOLIN SYNAIR 46 | 46 | 8.7 | 181 | 271 | −50 |
Refrigerant Compressor Oil
RENISO TRITON synthetic refrigeration oils are based on polyolester (POE) base stocks, fully miscible with the HFC refrigerants (R134a, R404A, R507, R410A, R407C) used in modern refrigeration and air-conditioning systems where CFC/HCFC refrigerants have been phased out. Meets DIN 51503 categories KO and KE. These fluids are hygroscopic. Strict moisture control during installation and maintenance is essential to prevent acid formation and system damage.
RENISO TRITON Series, Synthetic Refrigerant Compressor Oil
| Product | KV @40°C (cSt) | KV @100°C (cSt) | VI | Flash Pt (°C) | Pour Pt (°C) |
|---|---|---|---|---|---|
| RENISO TRITON SE 55 | 55 | 8.6 | 137 | 288 | −48 |
| RENISO TRITON SE 170 | 173 | 17.1 | 106 | 280 | −27 |
| RENISO TRITON SEZ 32 | 32 | 6.1 | 141 | 250 | −57 |
| RENISO TRITON SEZ 68 | 68 | 9.9 | 130 | 258 | −39 |
| RENISO TRITON SEZ 100 | 100 | 12.5 | 130 | 262 | −30 |